Nacra SE Mainsail - Kangaroo Sails

You can get a new Nacra SE mainsail from Kangaroo Sails in three cuts. The Beach cut with white Dacron batten pockets is meant for leisure sailors, the Hightech cut with batten pockets in the sailcloth for racers, and the Decksweeper is a further option. You then choose the cloth, window, battens and colours.

Which cut suits you?

• Beach for relaxed leisure sailing: the panels run radially from head and clew – 4 panels at the head, 10 at the clew and one along the luff. Flat, horizontal reinforcements and white Dacron batten pockets.
• Hightech for the race course: with 6 panels at the head, 11 at the clew and one along the luff, this radial cut handles the loads in the sail better and allows a more precise profile. Reinforcements are cut flat and fully bonded, and the batten pockets use the sailcloth itself.
• Decksweeper: offered as a third cut option. On a Decksweeper the foot reaches down to just above the trampoline (usually with a curved boom): sail and trampoline act like an end plate, reducing the tip vortices along the foot for better pointing and speed upwind. Widely used in racing since the 2017 F18 Worlds.

Options

• Window: lower panels in window film (possible with Beach and Hightech)
• Multi-colour layout possible
• Battens: none, with battens, or battens for the Decksweeper (DS)
• Qbond: yes or no

Cloths

• Dacron: woven polyester cloth in white – easy to handle and long-lasting.
• Pentex: three-layer composite – Pentex fibres in the core, Mylar film on both sides, laminated under pressure – giving high strength and shape stability at low weight for racing and cruising. Available in black, smoke, white and silver.
• Mylar: a laminate on the Pentex principle, but with polyester fibres; in smoke, white, blue, green and red.

Compatible with

• Nacra SE